Torque Wrench for Implant Attachments

The Torque and Thumb Knob Wrench Kit (#9020) in this section contains a 30 Ncm Torque Wrench, 15mm LOCATOR insert driver and a Thumb Knob Wrench. All at a great price!

This Torque Wrench system is very easy to use and achieves consistent pre-loading of LOCATOR implant abutments. The torque wrench is pre-calibrated at 30 Ncm which is the recommended tightening force for threading LOCATOR abutments into dental implants.

Various connection types of LOCATOR® Torque Wrench Drivers are available that fit into commonly used implant torque wrenches to allow torque tightening of the LOCATOR Implant Abutment.  In addition, the use of any Torque Wrench with a .050 (1.25mm) Hex Torque Wrench Driver Tip will fit into the backside of the LOCATOR Abutment Driver.  Use your own Torque Wench with either of these options to achieve the minimum seating force of 30N-cm that will help prevent screw loosening of the LOCATOR Implant Abutment.